Tall Juniper First Styling

This is a  Blaauws Juniper that I acquired locally from the family of an enthusiast who  had passed away. It was in poor health when I acquired it, having been neglected for several years previously. The following picture shows how it looked when I brought it home in February 2016. A lot of the foliage had died back and what remained had become quite extended, pale and thin. It was re-potted immediately and a feeding programme commenced to try and return the tree to full health. That was two and a half years ago.

The next picture shows how the tree looked at the start of the day. The thin extended branches have been pruned off and the new growth is closer to the trunk line, much healthier and stronger.

The tree is now about 60 cm. tall. It has a long slender trunk line, slowly tapering towards the apex with slight movement to the right. The lower right hand side of the trunk is quite straight and there is a considerable distance between the base of the trunk and the first right hand branch.The nebari is uneven with 1 large, thick root extending to the left; the other radial roots are quite insignificant by comparison.

A relatively thin tree like this will never look its’ best with a full heavy canopy of foliage. Minimalism is what is required here, to make the most of the material.

 

I have decided that this tree will be developed in the literati style; a style characterised by thin trunks and sparse foliage. Junipers are also enhanced by dramatic areas of deadwood. So the first task was to remove and jin all the branches that would not be critical to the perceived design. Many of the jinned branches were the connected by a shari running the length of the trunk. The following picture demonstrates the start of this stage.

After thinning out the foliage, the remaining branches were wired and bent into position. The next picture shows how the tree looks at the moment. Its quite possible,when I next work on the tree that more branches will be removed to simplify the design even further, but I will leave that decision for another day.

The next major job will be to re-pot and correct the planting angle next year. The next picture is a photo montage showing the tree rehoused in a nice Ian Baillie pot, which I am saving for this purpose.